Material Introduction
Lasenic® ABS+PC30% alloy was modifying by PC and ABS materials, include 70% ABS+30% PC. The PC and ABS blends integrated PC and ABS advantages. On the one hand, it can improve the heat resistance, impact resistance and tensile properties of ABS, And make ABS used at high-end field . On the other hand, it can reduce the melt viscosity of the PC, improve PC liquidity and improve its processing performance, and reduce inside stress , to reduce the impact strength and notch sensitivity thickness. The operating temperature -40-120 °C.

Lasenic® ABS+PC30% Standard Sizes, Colors, Grades, Brands, Types
Lasenic® ABS+PC30% sheet
Thickness (mm) Width × Length (mm)
2mm-200mm 610mmx1220mm/2000mm
Lasenic® ABS+PC30% rod
Diameter (mm) Length (mm)
2mm-200mm 1000mm/2000mm
Name: Lasenic® ABS+PC30% alloy(acrylonitrile-butadiene-styrene copolymer+polycarbonate and mixture)
Colors Include: Natural, black
Types: Rods, sheets

Note.Remarks
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.

  • ♦ High mechanical strength, good creep resistance (even at low temperatures)
    ♦ having a high impact strength
    ♦ Keep good rigidity at a wide range.
    ♦ anti-energy rays, good electrical insulation
    ♦ very good dimensional stability
    ♦ Good chemical resistance, acid resistance, water-based and pH more acidic substances, with the exception of strong oxidizing acids

Product Category

Shenzhen Quanda Plastic Co., Ltd.
Add.: 13/F,Baolong Building B, Longguan West Rd.,Longhua District,Shenzhen,China.
Tel.: +86-755-28113160
Fax: +86-755-28018885
Mobile:+86-13421367051
Skype:quandaplastic
E-mail: sales@quandaplastic.com
Website: www.quandaplastic.com

 
Online Service