Material Introduction
Good mechanical properties and rigidity, and close to the metal material. It’s an ideal replacement material of copper, cast zinc, steel, aluminum and other metal materials. Excellent fatigue resistance and creep resistance. Good abrasion resistance, self-lubricated and friction. High thermal stability, good chemical stability and excellent electrical insulation. And it can be used in temperatures ranging from -50℃ to +110℃.

Qunsail® POM Standard Sizes, Colors, Grades, Brands, Types
Qunsail® POM Acetal sheet
Thickness (mm) Width × Length (mm)
0.3--1.5mm(in roll) W:700mm,any length
2--5mm 700mm x 1200mm
6--12mm 600mm x 1200mm
15--60mm 1000mm x 2000mm
65--150mm 600mm x 1200mm
1000mm x 1200mm
Qunsail® POM Acetal rod
Diameter (mm) Length (mm)
2mm--5mm(in roll) Any length
6mm--100mm 1000mm,3000mm
110mm--250mm 1000mm
Name: Qunsail® POM (Polyoxymethylene, Polyacetal, Delrin)
Colors include: Natural (white), Black, other colors
Types: Rods, Sheets, Plates, Tubes, Profiles

1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.

Grades include:
POM(ESD), black
POM with carbon fiber to reach electrical conductivity
Volume resistivity: 10^3—10^5
Surface resistivity: 10^3—10^5
POM(Antistatic), ivory
Volume resistivity: 10^6—10^9
Surface resistivity: 10^6—10^9
POM+ Carbon Fiber, black

Qunsail® POM acetal materials which usually made available in five grades

♦ Qunsail® POM903C , general purpose copolymer grade This grade own better Hydrolysis resistance, alkali resistance, thermal oxidative degradation than homopolymer acetal, suitable for precision machined parts.

♦ Qunsail® POM560C, copolymer POM acetal reinforced grade Compared to POM903C, the high viscosity of this grade increased the compactness, stiffness and strength, suitable for precision parts in which air tightness, sealing are important.

♦ Qunsail® POM530YS, Homopolymer medical grade This grade is porosity-free grade and which is selected through a special resin material, the component of the raw materials comply with the applicable regulations of the European Union (Directive 2002/72 / EC, as amended) and the provisions of the United States of America (FDA) for plastic materials and articles in food contact and ISO 10993-1 standards on material biocompatibility testing requirements.

♦ Qunsail®POM502H, Homopolymer Compared to copolymer, this grade own better mechanical strength, hardness and creep resistance properties, and lower thermal expansion coefficient and better wear resistance

♦ Qunsail® POM503CF This is a blend of the Hostaform® C, which is mixed by PTFE resin and Hostaform acetal copolymer resin. POM503CF own same strength of POM903C. Compared to pure polyacetal, POM503CF is more softer, and own lower stiffness and smoother. Compared to POM903C and POM502H, Qunsail® POM503CF provides excellent lubricating properties. The bearing was processed by Qunsail® POM503CF has a long life and low friction, no stick-slip characteristics.

  • Advantages:
    ♦ High surface hardness, low abrasion consumption, impact fatigue and shock resistance, low coefficient friction, and self-lubricating, therefore, it is the first material choice for manufacturing gear.
    ♦ High mechanical strength and rigidity. Although the contraction rate is high, the dimension is stable.
    ♦ Good dielectric properties, solvent resistance, non-stress cracking, no porosity.
    ♦ Torsional resistance, it can be restored to the original shape when removing the external force.
    ♦ Low water absorption

    ♦ Poor acid resistance
    ♦ Weatherability is not excellent especially the UV
    ♦ Difficult to glue and paint

Product Category

Shenzhen Quanda Plastic Co., Ltd.
Add.: 13/F,Baolong Building B, Longguan West Rd.,Longhua District,Shenzhen,China.
Tel.: +86-755-28113160
Fax: +86-755-28018885

Online Service